COP-USA DVRH264-E4 - Manual (Page 12)

412
2. DATE: It will show all the recording status in this day, you can playback the record file in this
period via click the corresponding period.
PLYBACK: You can press ǏEnterǐ input number directly to setup playback time.After setting,move
the cursor to “PLAYBACK”, and then press”APLLY”to enter into video playback of that time.Also you
can select any period of time in the video status frame after searching,press”APLLY”to enter into the
video playback of this period.
FILE LIST:
Enter into the video file list interface of the selected date.
LOG SEARCH: Enter into the log seaching interface.
EXIT: Exit”video search” to back to the previous menu.
1. FILE LIST
Setup the searching date, after pressing “SERACH”,move the cursor to “FILE LIST” and
press”APPLY”to enter into the video file list of this date.
CHANNEL: There is 1,2,3,4 and all channel, totally 5 options. Press ǏEnterǐto select.
TYPE: There are all,normal and alarm,totally 3 options.PressǏEnterǐto select.
Instruction˖
1. Ǐ FILE LISTǐˈ“CHANNEL”is the recording file which belong to which channel, “SIZE” is
display the size of this file˄Unit˖MB˅ˈ“TYPE” is display the type of recording fileˈthere are two
types: normal and alarmˈpress“BACKUP”button can export the selected files to USB storage˗
2. After moving the cursor up and down and select the files, and pressǏAPPLYǐto enter into
playback interfaceDŽIf the all channels have recording files, it will playback all windows at the same
time˗
3. If setup as “on” in theǏRECORD TIMEǐin ǏBASIC SETUPǐˈit will show the date/time when
playback record file˗If setup as “off”it will not display time˗
4. When playbackˈcan pressǏSLOWǐto play slowly˗pressǏFORWARDǐǃǏREVERSEǐto
speedǃreverse play˗also can pressǏPAUSE/STEPǐto pause and frame by frame play˗PressǏExitǐ
to exit from playback and return to the former menu˗
5. When finished playback files, it will return to the file list interface.