COP-USA DVRH264-E4 - Manual (Page 24)

424
BAUD RATE: select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600
DATA BIT: there are 5,6,7,8 options to select, default setting is 8.
STOP BIT: there are 1and 2 to select, the default setting is 1.
VERIFY: there are None/Odd/Even/Mark/Space to select, the default setting is none.
ADDRESS: Fill the code of respective PTZ
7. NETWORK SETUP
Move the cursor to [NETWORK SETUP] (Icon thighlitend when selected), and press ǏEnterǐ to
enter into setting interface .
TYPE: There are PPPOE, DHCP & Static three options.
ƽ STATIC
Select [Static] in the type, and press [Enter] to enter into the interface as followings