Canon FS 2710 - Manual (Page 8)

8
8
Quick Start Instructions
Those who wish to start scanning immediately should follow the procedures below. If
you require further information at any stage, read the pages referenced at each step.
Installing Plug-in module FS p. 12
1. Install Plug-in module FS.
(1) Place the CanoScan Setup Utility CD-ROM in the CD-ROM Drive.
(2) Follow the instructions on the screen to complete the installation of
PhotoShop LE and Plug-in module FS.
Starting Plug-in module FS p. 17
1. Select [CanonPI FS 3.6] from within Photoshop and display the
Plug-in module FS control panel.
• Plug-in module FS is a plug-in module and cannot be run as a stand-
alone application. Photoshop Ver. 3.0 or later or Photoshop LE pro-
vided with the package must be previously installed before you can run
Plug-in module FS.
Selecting the Film Type p. 18
1. Select the film type that you intend to use.
Previewing p. 19
1. Place the film in the scanner.
2. Click on the [Preview] button.
• Plug-in module FS will read the film and show the results in the Preview
window.
Preview Window
➟
1
1
3 3
2
2
4
4