In case of difficulty, English – Clarion DVH943 User Manual
Page 16
Advertising
16
DVH943
English
9. IN CASE OF DIFFICULTY
Problem
Nothing happens when
buttons are pressed.
No sound produced
from centre speaker
Cause
The microprocessor has
malfunctioned due to noise,
etc.
The source being played is
a 2-ch source lacking a
centre channel (music CD,
linear PCM stereo, etc.).
Dolby Pro Logic II or DSF
is set to OFF.
The centre speaker setting
is OFF (default setting is
ON).
Measure
Use a narrow stick to press the [RESET] switch on
the side of the 5.1ch surround decoder. Note that
when the [RESET] switch is pressed, all titles and
other data placed in memory will be erased.
Either choose one of the Dolby Pro Logic II modes,
or set DSF effect to ON (see P. 7).
Set centre speaker (SP-SEL) to ON (see P. 8)
5.1ch surround
decoder
[RESET] switch
Advertising