Clarion DVH943 - Manual (Page 7)

DVH943
7
English
Dolby Pro Logic II Menu Selection
About the Dolby Pro Logic II Mode
• Initial setting is [PL II OFF].
■
MUSIC mode
• Suitable for CDs and other stereo sources.
■
MATRIX mode
• Suitable for AM/FM radio sources.
■
MOVIE mode
• Suitable for DVD video movies.
■
VIRTUAL mode
• Suitable for movies and other audio sources.
1. Press the [ADF] button to enter PLII mode.
2. Press the [ a ] or [ d ] button to select PLII.
[MUSIC]
➜
[MATRIX]
➜
[MOVIE]
➜
[VIRTUAL]
➜
[PLII OFF]
3. Press the [ADF] button to return to the
original mode.
Notes:
• The PL II menu cannot be selected when [SP-
SEL] has been used to set centre speakers and
rear (surround) speakers to [OFF].
• Sound is produced from the centre speaker only
when either Dolby Pro Logic II mode, or DSF
mode is set to ON (2-channel source playback).
DSF Setting
DSF(Digital Sound Field) makes it possible
through sound simulation to enjoy the acoustic
experience you would have in a concert hall or a
live performance hall.
• Initial setting is [OFF].
1. Press the [ADF] button to enter DSF mode.
2. Press the [ a ] or [ d ] button to select DSF
menu.
1 HALL: Large concert hall.
2 CHURCH: Charch with a vaulted ceiling.
3 STADIUM: Large stadium without roof or
walls.
4 LIVE: Live performance hall, larger than a
jazz club.
5 JAZZCLUB: Jazz club with a low ceiling.
6 THEATER: Movie or drama theater.
7 OFF: DSF off.
3. Press the [ADF] button to return to the
original mode.
5. OPERATIONS
Operations (DXZ748RMP)
Setting parametric equalizer
(P.EQ)
The parametric equalizer function allows you to
adjust the frequency characteristics to suit the
car.
• The initial value provides the following settings
for all speakers.
FREQ = 1kHz, Q =1, GAIN = 0dB
• Some distortion may be heard if the [ROTARY]
knob is turned rapidly.
1. Press and hold the [ADJ] button for 1 second
or longer to enter adjust mode.
2. Press the [ a ] or [ d ] button to change to
the [P.EQ E E E E E ] display.
3. Press the [ENT] button to display the
adjustment item.
Press the [ a ] or [ d ] button to select
[EFFECT], [SIGNAL], [SP-SEL], [BAND],
[FREQ], [Q], [GAIN] or
[SIGNAL].
●
EFFECT: P.EQ effect is turned on or off.
• Initial setting is [OFF]
●
SIGNAL: selects the adjustment signal.
• SGNL P-NOIS: set when pink noise is to
be used
• SGNL MUSIC: set to use music signals
●
SP-SEL: selects the speakers whose P.EQ
value is to be adjusted.
• SP FRONT: front speaker
• SP CENTER: centre speaker
• SP SURROUND: surround speaker
●
BAND: selects the frequency band (Band
1 to 3) to adjust.
●
FREQ: selects the frequency for bands 1
to 3.
• The range of adjustments is from 20 Hz
to 20 kHz.
●
Q: sets the Q curve.
• Larger numbers produce a sharper Q
characteristics curve while smaller
numbers produce gentler characteristics.
Adjustments are made in the range Q1
to Q20.
●
GAIN: adjusts the output level.
• Adjustments are made in the range -12
dB to +12 dB.