Cub Cadet 2000 Series User Manual
Page 65
Advertising
Drive
59
34.
Lift the left axle, differential housing, 14T miter gear
assembly off of the ring gear.
35.
Separate the miter gear from the axle shaft by remov-
ing the pair of spiral lock rings. See Figure 5.52.
36.
Separate the differential assembly components and
inspect for damage or wear. See Figure 5.53.
37.
Lift the ring gear and the spider gear assembly off of
the right axle assembly.
38.
Separate the spider gear assembly and inspect for
damage or wear. See Figure 5.54.
39.
Repeat steps 35 & 36 on the right axle assembly.
Figure 5.52
Spiral ring
Figure 5.53
Miter gear
Axle shaft
Differential housing
Spiral rings
Figure 5.54
Ring gear
Spider assembly
Advertising