Cub Cadet MMZ Rider User Manual
Page 18
Advertising
Cub Cadet Commercial M60 Tank - 2002 and prior years
14
26.
Make certain the hydrostatic fluid drain contain-
ers are below the skid plate assembly.
27.
Remove all four of the hydraulic line connectors
from both hydrostatic pumps using a 3/4" wrench
and a 7/8” wrench.
28.
Slowly lower the skid plate assembly and remove
it from the unit. See Figure 12.
29.
Install the hydrostatic drive assembly in the
reverse order above.
Figure 12
Skid Plate
Assembly
Advertising