C&H Technologies M222 - Manual (Page 12)

6
2.4 PREPARATION FOR RESHIPMENT
If the module is to be shipped separately it should be enclosed in a suitable water and vapor proof
anti-static bag. Heat seal or tape the bag to insure a moisture-proof closure. When sealing the
bag, keep trapped air volume to a minimum. The shipping container should be a rigid box of
sufficient size and strength to protect the equipment from damage. If the module was received
separately from a C&H system, then the original module shipping container and packing material
may be re-used if it is still in good condition.
C&H Technologies, Inc. <> 445 Round Rock West Drive <> Round Rock, TX 78681 <> www.chtech.com