Eowave Eobody2 USB8 SensorBox - Manual (Page 14)

Open the Parameters window
To open the Parameters window, click on the arrow preceeding PARAMETERS.
The Parameters window enables to adjust internal processing parameters for each input (1 to 8).
Refer to the description of each parameter for use. To increase or decrease parameter values, click on the
case you want to edit and slightly move up or down your mouse.
Note that all setting parameters changes are made in real time. To save a configuration, click on «save current
parameters».
What are these internal processing parameters?
Eobody2 usb sensorbox is not just an analogue-to-digital converter, it has a unique internal processing espe-
cially designed to analyse, process and configure the signal before it is sent to the host. This internal process-
ing offers several advantages.
> Pre-configured parameters processings have been designed considering most common sensor use and are
perfectly adapted to sensor use for musical or video applications.
> You can use Eobody2 directly with your software sequencer without programming needs.
> Internal processing does not use your computer cpu, so you can keep more cpu resources for your apps.
> Internal configuration can be saved inside Eobody2 internal memory for future use.
> Parameters filter the signal to optimize data to be sent to the computer and get a better response from sen-
sors. With these, you will be able to choose parts of the signal to be processed, define the signal resolution,
add a noise gate, a lag low-pass filter, inverse the signal, choose the type of message to be sent...
USB 8 sensor interface / Parameters window
III.5. Parameters window