Eowave Eobody2 USB8 SensorBox - Manual (Page 16)

USB 8 sensor interface / Parameters window
inverse
127 becomes 0 and 0 becomes 127. This way you may inverse the curse of a sensor.
With an expression pedal, for example, you’ll be able to inverse its curse.
filter
0-64
32 bits low-pass filter that smoothes the signal - for unstable sensors.
gate
noise gate:12 values [0-11]
Sensor
Noise band
Sensor signal
Sampled value
Sampled value
+MIDI message
2* (noise)
0
t
A noise gate threshold reduces
the bit depht of the signal. If the
analogue signal moves inside
the range of the noise gate, no
message will be sent. This field
enables the user to set the width
of the range. A large range will
be very effective against strong
noise but will make the values
less sensitive to a relevant
change of the analogue signal.
A threshold of 5 corresponds to
127 different possible values (ie:
the analogue has to change at
least of 32 (from 4095 above or under its current position to be detected as changing). A
threshold of 11 corresponds to 2 bits , usefull for switches or all on/off sensors.