Erica Synths Midi to Clock module - Manual

THANK YOU FOR PURCHASING MIDI TO CLOCK
Here you plug a midi cable from the midi
output of your sequencer or drum machine
This is main clock output that follows BPM
of the midi clock
Divided clock output where you get midi
clock divided for 2, 4 or 8
In CONT position module receives midi clock
continuously until it is present. In CTRL
position analogue clock on the output
starts and stops in line with midi start
and stop messages received or when you
push start button on the sequencer
Midi activity LED – blinks, when
module receives midi messages
LED gives visual indication of
the clock rate
LED gives visual indication of
the divided clock rate
Select desired division
of the midi clock
THANK YOU FOR ORDERING ERICA SYNTHS MIDI TO CLOCK MODULE! If you are true analogue enthusiast, you most probably have couple
of analogue sequencers that need to be synced to your drum machines and other midi controllers, therefore Erica synths has developed a simple
and cost-effective MIDI TO CLOCK module with few interesting features. Besides direct clock output that follows BPM of the midi sequencer or
drum machine, it has second clock output with selectable clock division by 2, 4 and 8.