Erica Synths Midi to Clock module - Manual (Page 2)

THANK YOU FOR PURCHASING MIDI TO CLOCK
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths midi to
clock module below, ‘cause only this will guarantee proper
operation of the module and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless
they are made waterproof. Erica Synths module is NOT
intended for use in a humid or wet environment. No
liquids or other conducting substances must get into the
module. Should this happen, the module should be
disconnected from mains power immediately, dried,
examined and cleaned by a qualified technician.
Do not expose the module to temperatures above +50° C
or below -20° C.
Transport the instrument with modules installed
carefully, never let it drop or fall over. Warranty does
not apply to modules with visual damages.
The module has to be shipped in the original packaging
only. Any module shipped to us for return, exchange
and/or warranty repair has to be in its original
packaging. All other deliveries will be rejected and
returned to you. Make sure you keep the original
packaging and technical documentation.
You will find Erica Synths terms of warranty at
www.ericasynths.lv.
Items for return, exchange and/or warranty repair have to be
sent to: Erica Synths Andrejostas Str. 4a , room T8-C, Riga,
Latvia, LV-1045
DISPOSAL
This device complies to the EU guidelines and is manufactured
RoHS conforming without use of led, mercury, cadmium and
chrome. Nevertheless, this device is special waste and disposal
in household waste is not recommended.
User manual by Girts Ozolins@Erica Synths .
Design by Edgars Rasins.
Copying, distribution or any commercial use in any way is
prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through
www.ericasynths.lv or via e-mail [email protected].
CHECK THE DEMOS OF OTHER ERICA SYNTHS MODULES ON
WWW.ERICASYNTHS.LV