Classic Smart 4F - Manual (Page 6)

GB
6
SET UP BY USING THE LIBRARY SEARCH FACILITY
If you cannot identify the correct code for your device from the device code list
use the code search facility.
1) Switch on the device you wish to control (e.g. your TV)
2) Press and hold down the required device key on the smart 4F (e.g. TV)
and at the same time press and hold down the OK key. Keep both keys pressed
down for approximately 5 seconds until the indicator light on the device key
being held down lights and remains on. Release both keys.
3) Point the smart 4F towards the device you wish to control (e.g. your TV)
and press either the P up or P down key repeatedly until your device switches off.
The P up key searches forwards through the library and the P down key
searches backwards through the library. Alternatively hold down the P up or
P down key and the smart 4F will search through each available code at
approximately one-second intervals.
4) When your device switches off stop pressing the key. Should you
accidentally press the key after your device has switched off you can back
up by pressing the opposite key.
5) Press and release the device mode key (TV in this example) and the
indicator will blink 3 times. This indicates that you have now stored the code
into the handset.
6) Switch your device back on and try all of the functions of the remote control.
7) If your device does not respond correctly to the commands from the remote
control continue the search process until you find a suitable code by
repeating steps 1) to 5).
The handset will continue its search from the last code you selected.
Please be patient when searching by this method as the library contains a
large number of codes and it may take some time to find a suitable code.
READ OUT THE STORED CODE NUMBER
Having found a suitable code by the search method it is useful to identify the code
number and record this in the battery compartment for future use.
1) Press and hold down the required device key on the smart 4F (e.g. TV)
and at the same time press and hold down the OK key. Keep both keys pressed
down for approximately 5 seconds until the indicator light on the device key being
held down lights and remains on. Release both keys.
2) Press and release the Mute key.
3) The indicator light will then blink the number of the first digit – pause –
blink the number of the second digit - pause
and then blink the number of the third digit.
e.g. Code 160: 1 blink = digit 1, 6 blinks = digit 6. 10 blinks = digit 0 (Note: 10 = 0).
4) The handset will then automatically return to normal operation.
HOW TO ADJUST COLOUR, CONTRAST, BRIGHTNESS, BASS
TREBLE AND BALANCE ON YOUR TV
With the smart 4F in TV device mode:
1) Press and release the desired function key. (e.g. Colour)
2) Within 5 seconds press the Volume + or Volume - key to adjust the setting.
3) After adjustment the handset will revert to normal operation within 5 seconds.
smart4F.indd 6 23.09.2008 17:10:40 Uhr