Cabletron Systems Device Management Module Dec GigaSwitch - Manual (Page 40)

9031754 E5 Configuration Views
3-3
Module Configuration View
Interface Configuration Table
clicking on one of the entries in the Interface Address Translation Table access
the Address Translation Table Information View. This view allows you to enter
information about a new interface to be included in the Interface Address
Translation Table or to edit the information for an existing entry.
Interface Configuration Table
The Interface Configuration Table displays information regarding the
interfaces attached to the GigaSwitch. The table headings and their
descriptions are Index, Description, Type, Bandwidth, Physical Address and
Operation Status. Double-clicking on one of the entries in the Interface
Configuration Table accesses the Interface Configuration View, which allows
you to change the Administrative Status for the interface to On, Off, or
Testing.The Interface Configuration view also includes a Device Banner for
the GigaSwitch and the Operation Status, Last Change, Physical Address,
Bandwidth, Packet Size and Queue Length for the selected interface.
Module Configuration View
Access the Module Configuration View by doing the following:
1. Access the DEC GigaSwitch Logical Device View via the Icon Subviews
menu.
2. Highlight the appropriate module.
3. Select Module Configuration for the Icon Subviews menu, which will
call the Board Table View.
Board Table View
The Board Table View allows you to change the status for the highlighted
module. Possible configuration choices are NotPresent, PowerDown,
PowerUp, PowerDownThenUp, Fault, RevMismatch, and
SelfTestInProgress. The Board Table View also displays the Index number,
Type, Hardware Rev, and Firmware Rev of the highlighted module.