Cabletron Systems Device Management Module Dec GigaSwitch - Manual (Page 54)

9031754 E5 DEC-Specific Applications
5-11
DecElanApp
DecElanApp
This application for the GigaSwitch provides the user with more statistical
tables, the ability to add or remove trap receivers, and the ability to add either
Read-Only or Read-Write management stations.
To access the DecElanApp, click on the Applications subview for the DEC
GigaSwitch icon. The DecElanApp allows the user access to the following
views:
Configuration
The DecElanApp Configuration View allows for the following settings to be
edited by the user:
Primary Application
The user may choose the application that they wish to be detailed in the
Performance View.
Update Switch
The user may specify whether the switch should be updated or not by clicking
on the Update Switch button so that it shows the desired setting (True or
False).
Port Traps
The user may enable or disable port traps by clicking on the Port Traps
button so that it shows the desired setting (Enable or Disable).
Init Switch
The user may choose between Other, Reset or ResetWithDefaults for this
setting.
Gateway
The user may specify the gateway used for downloading firmware.
This button accesses the FRU Configuration Table, which displays the Slot,
Description, Rev, and State of the port’s firmware.
Bridge Databases
The Bridge Databases icon subview accesses the 2-Port Address Table and the
Multi-Port Address Table. These tables display the Address, Port Number,
and Status of 2-Port and Multi-Port devices. In addition, the Multi-Port
Address table displays the Receive Port and Allow to Go To information for
each port.
FRU Configuration