Sending methods, Memory sending – Canon MPC600F/400 User Manual
Page 34
4-6
Sending Methods
This section describes the methods and advantages of the two main sending methods: Memory sending and
manual sending via the handset.
■
Memory Sending
Memory sending is a quick and easy way to send a document. As the first page of a multipage document is
being scanned into the machine’s memory, the machine begins calling the other party and transmitting the
information even as the remaining pages are being scanned.
Since the machine is multitasking, you can perform other operations while the machine is sending a fax.
The machine has enough memory to store up to approximately 270 pages* (fewer if the document contains
many graphics or particularly dense text).
* Based on Canon FAX Standard Chart No. 1, standard mode.
■
Memory Sending Using the ADF
1
Press
Fax
to set Fax Mode.
2
Prepare the document and load it into the ADF.
(
→
Reference Guide)
• For colour sending, press
Colour/B&W
to turn on its light.
(
→
p. 4-1)
• To adjust the resolution and contrast,
→
p. 4-2.
3
Dial the other party’s fax number.
• For dialling methods,
→
p. 4-3.
• If you enter the wrong number, press
Stop/Reset
, then enter
the correct number.
• If you must first dial a digit to get an outside line (“9”, for
example), add a pause after that digit by pressing
Redial/
Pause
.
4
Press
Start
to begin scanning for sending.
• When you use speed dialling, scanning starts automatically
after a few seconds if the
TIME OUT
setting is on. (
→
p. 9-5)
• To cancel sending once dialling has started, press
Stop/Reset
then .
(
→
p. 4-9)
• You can scan a document up to 1 metre long.
• You can scan up to 30 different documents for memory sending.
• When an error occurs during sending, the document is automatically deleted from memory, even if it was not sent
completely.
• If you send a colour document to a fax machine that does not support colour faxing, or
TRY AGAIN IN B&W
displays in the LCD,
→
p. 4-1.
Ex:
27/12 2002 FRI 15:30
FaxOnly
STANDARD
Ex:
MEMORY USED
0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Ex:
TEL=
9057951111