Canon MPC600F/400 - Manual (Page 56)

7-2
ACTIVITY REPORT
The machine is factory-set to automatically print an ACTIVITY REPORT after every 20 transactions. If you
want to print an ACTIVITY REPORT before it is automatically printed, follow this procedure:
• If you prefer the machine not to print an ACTIVITY REPORT after every 20 transactions, disable the ACTIVITY
REPORT setting. ( → p. 9-5)
1 Press Menu .
2 Use or to select REPORTS/LISTS .
3 Press OK twice.
• The machine prints an ACTIVITY REPORT.
Transactions in an ACTIVITY REPORT are listed chronologically.
Ex:
MENU
3.REPORTS/LISTS
▲ ▼
REPORTS/LISTS
1.ACTIVITY REPORT
PRINTING REPORT
27/12 2002 17:28 FAX 123 4567 CANON 001
******************************************
*** ACTIVITY REPORT ***
******************************************
ST. TIME CONNECTION TEL CONNECTION ID NO. MODE PGS. RESULT
27/12 15:10 905 795 1111 Canon CANADA 5001 AUTO RX ECM 1 OK 00’33
27/12 15:14 905 795 1111 Canon CANADA 5002 AUTO RX ECM 1 OK 00’24
27/12 15:22 03 3758 2111 Canon TOKYO 0001 B’CAST ECM 3 OK 01’18
27/12 15:45 2 887 0166 Canon AUSTRALIA 0001 B’CAST ECM 3 OK 01’18
27/12 16:10 905 795 1111 Canon CANADA 5003 AUTO RX ECM 1 OK 00’18
27/12 16:16 2 887 0166 Canon AUSTRALIA 5004 AUTO RX ECM 4 OK 00’59
27/12 16:27 20 545 8545 Canon EUROPE 0002 TRANSMIT COL 1 OK 01’20
27/12 16:30 20 545 8545 Canon EUROPE 0003 TRANSMIT COL 1 OK 04’12
27/12 16:53 03 3758 2111 Canon TOKYO 5005 AUTO RX ECM 1 OK 01’16
27/12 17:08 2 887 0166 Canon AUSTRALIA 0004 TRANSMIT COL 3 NG 00’51
3 STOP
27/12 17:20 1 432 2060 CANON OPTICS 0005 TRANSMIT COL 0 NG 00’01
0 018
INDICATES AN
ENTRY THAT HAS
APPEARED ON A
PREVIOUS REPORT.
TRANSACTION (TX/RX) NUMBER
TRANSACTION MODE
COLOUR TRANSACTION
ERROR CORRECTION MODE TRANSACTION
ERROR PAGE
ERROR CODE ( → p. 8-1)
Stop/Reset WAS PRESSED DURING TRANSACTION
TRANSACTION DURATION