Clarity D722 - Manual (Page 13)

22 23
6. Call from the Call Log
1. In idle mode, press <DOWN> to access the call log. Alternatively,
press <MENU/SELECT> to access the call log from the main menu.
2. Press <UP/DOWN> to select the desired call log entry.
3. Press <TALK ON / FLASH> or <SPEAKER> to dial out to the
selected entry.
7. Call from the Redial List
1. In idle mode, press <REDIAL/PAUSE> to access the redial list.
2. Press <UP> or <DOWN> to select the desired redial number.
3. Press <TALK ON/FLASH> or <SPEAKER> to dial out to the selected
number.
Note:
Your handset automatically times the duration of every call. The call
timer will display a few seconds after the call has been made. It is shown
in hours, minutes and seconds format.
Temporary tone dialing
If you have pulse (rotary) dialing service only, you can temporarily switch from
pulse to touch-tone dialing during a call.
During a call, press <*>. Buttons pressed after this send touch-tone signals. The
telephone automatically returns to pulse dialing mode after you end the call.
Answer a Call
When the phone rings, press <TALK ON / FLASH> to use the earpiece
- OR -
Press <SPEAKER > to use the speakerphone.
USING YOUR PHONE
End a Call
During a call connection on handset, press <TALK OFF/ CLEAR> to end
the call.
- OR -
Put the handset on the base station to end the call.
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in
the directory, call log or redial list while you are on a call.
Chain dialing can be useful if you wish to access numbers other than phone
numbers (such as bank account information or access codes) from the
directory, call log or redial list.
To access a number in the directory while on a call:
1. Press <MENU/SELECT>, then <UP/DOWN> to select Directory.
2. Press <MENU/SELECT>, then <UP/DOWN> or press the dial pad keys
(0 through 9) to find the desired entry.
3. Press <MENU/SELECT>. The telephone automatically dials the
displayed number.
To access a number in the call log history while on a call:
1. Press <MENU/SELECT>, then<UP/DOWN> to select Call log.
2. Press <MENU/SELECT>, then<UP/DOWN> to scroll to the desired
entry. (Press # to view the dialing options, if necessary.
3. Press <MENU/SELECT>. The telephone automatically dials the
displayed number.
To access the redial list while on a call:
1. Press <RD/P>. The screen shows the number most recently called. If it
is not the desired number, Press <UP/DOWN> to scroll to the desired
number.
2. Press <MENU/SELECT>. The handset dials the displayed number.
USING YOUR PHONE