Clarity D722 - Manual (Page 20)

36 37
4. Press <MENU/SELECT> to turn the voicemail indication off. A
confirmation tone sounds.
-OR-
Press <TALK OFF/CLEAR> to cancel the procedure.
Note: For information about using your voicemail service, contact your
telephone service provider for assistance
Set the Date and Time
You will need to set the correct time and date so that you know when you
received call list entries.
1. Press <MENU/SELECT>, then <UP/DOWN> to select Settings.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Set date /
time.
3. Press <MENU/SELECT>, then <UP/DOWN> to select Date & time.
4. Press <MENU/SELECT>, then use the keypad to enter the date ( MM/
DD/YY).
5. Press <MENU/SELECT>, then use the keypad to enter the time
(HH:MM). Press <UP> or <DOWN> to choose AM or PM.
6. Press <MENU/SELECT> to confirm.
CID time synchronization
CID time sync is programmed to be on. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call. You can
turn CID time sync off so the system uses the date and time that you set.
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select
Settings.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Set date/
time.
3. Press <MENU/SELECT>, then <UP/DOWN> to select CID time
sync.
4. Press <MENU/SELECT>, then <UP/DOWN> to select On or Off.
5. Press <MENU/SELECT> to save your preference.
HANDSET SETTINGS
Set the Ringer Tone
1. Press <MENU/ SELECT>, then <UP/DOWN> to select Ringers.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Ringer tone.
3. Press <MENU/SELECT>, then <UP/DOWN> to select the desired
ringer tone (a total of 10 melodies for your selection) for setting ringer
tone for external calls.
Note: The respective ringer tone will be played while browsing the
tone list.
4. Press <MENU/SELECT> to confirm.
Set the Ringer Volume
1. Press <MENU/ SELECT>, then <UP/DOWN> to select Ringers.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Ringer
volume.
3. Press <MENU/SELECT>, then <UP/DOWN> to set the ringer volume
(Off, Level 1 to Level 6).
Note: The respective ringer volume will be played during your
selection. If OFF is selected, <Ringer Off> icon will display.
4. Press <MENU/SELECT> to confirm.
Set Key Tone
A single beep is emitted when you press a key. You can turn on or off the key
tone.
1. Press <MENU / SELECT>, then <UP/DOWN> to select Settings.
2. Press <MENU / SELECT>, then <UP/DOWN>to select Key tone.
3. Press <MENU / SELECT>, then <UP/DOWN> to select On or Off.
4. Press <MENU/SELECT> to confirm.
HANDSET SETTINGS