Canon EOS Rebel XTI - Manual (Page 163)

163
Troubleshooting Guide
If the image has been erase-protected, it cannot be erased. (p. 122 )
The correct date and time has not been set. (p.37)
Make sure the video cable plug is connected all the way in. (p. 121 )
Set the video OUT format (NTSC/PAL) to the same video format as
the TV. (p.157)
Use the video cable that came with the camera. (p. 121 )
Image Review & Operation
The image cannot be erased.
The wrong shooting date and time is displayed.
No image appears on the TV screen.
If a problem occurs with the camera, an
error message is displayed. Follow the
suggested solution to resolve the
problem. To recover from the error
screen, turn the power switch off and on,
or remove and reinstall the battery.
If error 02 (CF card problem) is displayed,
remove and reinstall the CF card or
format the card. This may resolve the
problem.
If the same error keeps occurring, there may be a problem. Write
down the error code and consult your nearest Canon Service
Center.
Error Codes
Error code
Countermeasures
If an error code appears right after shooting, the picture might not have been
captured. After the error is resolved, press the <x> button and check if the
picture was captured.