KEYENCE LK-G5000 Series - Manual (Page 18)

18
Settings and Procedures
1. Data storage function settings
2. Selected OUT settings
3. Storage cycle settings
Controls the settings for the selected OUT, storage cycle, and amount of data stored.
Check the selected OUTs that you wish to store.
The storage cycle is the cycle at which measurement data is stored in the internal memory. Storage is performed in specified
multiples or with the timing input that has been specified in the “sampling cycle” in the common settings.
For example, with a sampling cycle setting of “200 μs”, if the storage cycle is set to “20x”, the storage cycle will be every
4 ms (= 200 μs x 20) . The storage cycle is set in “Storage cycle” in the data storage settings.
(1) Click “Data Storage”.
(2) Click “Data Storage Setting” in the window that has appeared.
* Once each setting has been configured, click “Send settings to controller” .
❶
❷
❸
❹