KEYENCE CV-H5N - Manual (Page 112)

4
CV-H5N-M-WW-NO4-E 4-28
Enabling Data Collection
1
Select [Start collection] from the [Data Collection] menu
or click the [Start collection] icon in the toolbar.
Data collection begins.
Reference
When collection starts, the [End collection] icon will appear in the
toolbar (red) and the [Collection status] icon on the status bar will
appear green.
Note
Data collection will not begin if the CV-5001 Series controller is not
connected.
Ending Data Collection
1
Select [End collection] from the [Data Collection] menu
or click the [End collection] icon in the toolbar.
Data collection stops.
Reference
When collection stops, the [Start collection] icon will appear in the
toolbar (green) and the [Collections status] icon on the status bar
will appear red.
Note
Data collection cannot be stopped if the CV-5001 Series controller
is not connected.
1
1