KEYENCE CV-H5N - Manual (Page 47)

2
CV-H5N-M-WW-NO2-E 2-23
2
Select [File] for [Read From].
• File
Select this to this to read/write the program data from/to
the drive folder within the computer.
• Connected CV
Select this to read/write the program data from/to the CV-
5001 Series controller connected to the computer.
3
Select [File Location].
Select a program data folder within the computer or an
external removable media.
Reference
Program number 005 saved on a memory card connected to the E
drive is selected in the example shown on the left.
4
Select [Save to].
• Drive C of Virtual CV
Select this to write the program number data in drive C of
virtual CV.
• Drive D of Virtual CV
Select this to write the program number data in drive D of
virtual CV.
5
Select [Program no.].
The default setting is the program number currently being
used by the simulator.