KEYENCE AutoID - Manual (Page 49)

3-17
3-4 Editing Setup Files
MANAGING PROJECTS
3
■ Receiving parameters
To read parameters that are already set to a device to AutoID Navigator, follow the procedure
below to receive the parameters.
Received parameters can be saved as setup files on AutoID Navigator, and their settings re-used
on other devices.
1
Click (read setting) at the top right of the screen.
2
The confirmation dialog box is displayed. Click the "OK" button.
The communication in progress dialog box is displayed and parameters start to be received.
3
The read completion dialog box is displayed. Click the "OK" button.
This completes reception of the parameters.