KEYENCE BL-1300 Series - Manual

1 E BL-1300-IM
Laser Bar Code Reader
BL-1300 Series
Instruction Manual
 General precautions
• Do not use this product for the purpose to protect a human body or
part of a human body.
• This product is not intended for use as an explosion-proof product. Do
not use this product in a hazardous location and/or potentially
explosive atmosphere.
• We recommend that you take substantial safety measures to avoid any
damage in the event a problem occurs.
• If the BL-1300 is modified or used in any way other than described in
the specifications, its function and performance cannot be guaranteed.
• When the BL-1300 is used in combination with other instruments, the
function and performance may be effected by operating conditions and
the surrounding environment.
• It is prohibited to use or copy all or any part of this manual without prior
approval.
• The information contained in this manual is subject to change without
notice.
 Safety precautions on laser product
The "BL-1300 Series Laser Barcode Reader" uses a visible laser light
source.
The BL-1300 Series barcode readers are equipped with the following
safety measures.
• Laser radiation emission warning LED (LASER LED)
During laser emission, the LASER ON LED illuminates. The LED ON
status can be clearly visible through protective eyewear; specifically
designed for the wavelength of 660nm.
• Laser forced OFF command
Sending the laser forced OFF command to the BL-1300 can inhibit
emission of laser beams. When working near the laser transmitter, be
sure to use the laser forced OFF command to avoid looking into the
laser beams.
* When this command is selected, the bottom STABILITY LED flashes.
 IEC warning/explanatory label locations
Use the suitable IEC warning/explanatory label included in the package
of this product according to the countries and/or regions where this
product is used.
In this case, it can be affixed on the IEC warning/explanatory label,
which has already been affixed to this product.
DANGER
Failure to follow these instructions may lead to death or
serious injury.
WARNING Failure to follow these instructions may lead to injury.
CAUTION
Failure to follow these instructions may lead to product
damage (product malfunction, etc.).
Note Provides additional information on proper operation.
TIPS
Indicates useful information or information that aids
understanding of text descriptions.
Safety information for BL-1300 Series
WARNING
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
AVERTISSEMENT
L'utilisation des commandes ou réglages ou l'exécution
des procédures autres que celles spécifiées dans les
présentes exigences peuvent être la cause d'une
exposition à un rayonnement dangereux.
96M12900
*96M12900-1*
Model BL-1300, 1301, 1300HA, 1301HA, 1350HA, 1351HA, 1370, 1371
Wavelength 660 nm
Output 85 W
Pulse duration 112 s
Laser Class
FDA (CDRH)
Part 1040.10
Class 2 Laser Product
IEC 60825-1 Class 2 Laser Product
WARNING
• Follow the instructions mentioned in this manual.
Otherwise, injury to the human body (eyes and skin)
may result.
Precautions on class 2 laser products
• Do not stare into the beam.
• Do not direct the beam at other people or into areas
where other people unconnected with the laser work
might be present.
• Be careful of the path of the laser beam.
If there is a danger that the operator may be
exposed to the laser beam reflected by specular or
diffuse reflection, block the beam by installing an
enclosure with the appropriate reflectance.
• Install the products so that the path of the laser beam
is not as the same height as that of human eye.
• Do not disassemble this product. Laser emission
from this product is not automatically stopped when
it is disassembled.
BL- 1300/1301/1300HA/
1301HA/1370/1371
BL-1350HA/1351HA