Casio SF-4985ER - Manual (Page 98)

96
PART 6 Data Communications
•
Some SF Unit models have a mark protection feature to protect against
accidental erasure of data. This unit does not feature mark protection, and so
such data is received by this unit disregarding the mark protection.
•
Data cannot be sent to this SF Unit from a CASIO SF-5580, 5580E, 5590SY,
5590SYE, 5780, 5780E, 5790SY, 5790SYE, 5980, 5980E, 5990SY, 5990SYE,
6500SY, 6700SY, 6900SY, 7100SY or 7200SY unit.
•
When data is sent to this SF Unit from a CASIO CSF or NX Unit, CSF/NX
Telephone Directory MEMO item data is stored in the Telephone Directory
FREE1 item of this SF Unit.
•
When data is sent to this SF Unit from a CASIO CSF or NX Unit, all text
becomes monochrome.
•
When data is sent to this SF Unit from a CASIO CSF or NX Unit, all calendar
highlighting becomes monochrome. All CSF/NX calendar dates that are
orange or green are converted to highlighted dates.
•
This unit cannot receive PERSONAL, FAMILY, TIMETABLE, or GOLF
memo data from a CASIO NX Unit.
Setting Up for Data Communications
The following describes what you should do to set up for data communications
between two SF Units, between an SF Unit and a CASIO CSF Unit or NX Unit,
or between this unit and a personal computer.
To connect the SF-4900ER/SF-4980ER/SF-4985ER to another
SF Unit (or CSF Unit/NX Unit)
1. Make sure that the power of both units is switched off.
2. Open the covers of the data communication jacks of the two SF Units.
3. Connect the two units using the optional SB-62 cable.
•
The 3-pin plug of the SB-62 cable is a two-step type. When attaching the plug,
be sure to push it firmly into the jacks as far as it will go.