Kofax Communication Server 9.1.1 - Manual (Page 10)

Changes in Behavior
10 Kofax Communication Server Release Notes
TC/LINK-LN: Some Messages Cannot Be Processed
With Lotus Notes client software older than release 8.5.3, some messages cannot be processed
by TC/LINK-LN. Installing Lotus Notes client 8.5.3 on the TC/LINK computer solves the
problem. (SPR00092299)
For more information, see:
▪ TC/LINK-LN Technical Manual, version 2.17.01 edition 2
Chapter Hints / Troubleshooting - Some Messages Cannot be Processed
Email Header in Body Text
Email header information like date, from, to, and subject can be added to the email body
at the very beginning. This feature is available for TC/LINK-SM, TC/LINK-SDD, and TC/
LINK-MX7. (SPR00093319)
This feature is configured either during setup of the appropriate link, or later via the
following registry values:
HKEY_LOCAL_MACHINE\Software\TOPCALL\TCLINKSM\General\ExitDll
HKEY_LOCAL_MACHINE\Software\TOPCALL\TCLINKSM\General
\SupportMultiPartRelatedHtml
HKEY_LOCAL_MACHINE\Software\TOPCALL\TCLINKSM\TCMIME\HtmlAsAlternative
Set ExitDll to ExitEmailHeader.dll to enable the feature. Additional options are described in
the manual.
You can configure the format of the header by editing the file ExitEmailHeaderConfig.txt in
the folder
c:\tcoss\tclp\
. This UTF-8 text file consists of internal variables defining the
HTML snippets of the header that is to be created.
Restrictions:
▪ No other TC/LINK Exit is supported if this feature is enabled.
▪ RTF body is not supported.
▪ Characters from non-binary message parts (e.g. subject) are converted to the configured
TCOSS code page.
▪ If you use text directives (++ commands) to modify e.g. message subject, the subject is not
exchanged in the generated email header in body text.
For more information, see:
▪ TC/LINK-SM / TC/LINK-OC Technical Manual, version 2.07.00 edition 5
Chapter Installation - Common Installation Steps - TC/LINK-SM Easy Installation
Chapter Installation - Special Features - Email Header in Body Text
KCS Printer Driver Changes
The default value of the parameter “Enable advanced printing features” in KCS printer
properties is now disabled (check box is cleared); both on new installations and when