Kofax INDICIUS 6.0 - Manual (Page 24)

Chapter 3
18 Getting Started Guide (Free-Form)
Running the Solicitors Letters Example
The example can be tested on a batch of example images. The typical test process
(which you will work through later) is as follows:
Step 1: Create a batch.
Step 2: Add images to the batch and establish document boundaries using
Kofax Capture Scan.
Step 3: Run the batch through INDICIUS Recognition to produce raw
captured data.
Step 4: Correct, complete and validate the batch with INDICIUS Completion.
Step 5: Reformat the data using INDICIUS Scripted Export.
Note
The example batch class uses Scripted Export but does not use Kofax Capture
Release. In production, Release would be used to transfer data to the back-end
system.
Process the Batch from Batch Manager
This document will first take you through typical processing in a low volume
scenario, using Kofax Capture Batch Manager.
X To create an example batch in Batch Manager
1
Start Batch Manager by clicking Start on the taskbar to display the menu, and
selecting:
All Programs | Kofax Capture 8.0 | Batch Manager.
2 Select File | New Batch… or click Create Batch on the toolbar.
3 From the “Batch class:” list, select the “INDICIUS Solicitors Letters” batch
class.