Cobra Digital XRS 9640 - Manual (Page 13)

Settings
Your Detector
Nothing Comes Close to a Cobra ® 21
Settings
Your Detector
20 English
Spectre 1 Alert
The detector is undetectable by Spectre 1 detection devices and will alert
you when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want
your unit to show Spectre 1 Alerts. With Spectre 1 Detect mode on, you can
also choose whether or not you want your unit to sound audible Spectre 1
Alerts. The factory settings are Spectre 1 Detect off, Spectre 1 Audio off.
Spectre 1 Detect On
Spectre On
Spectre 1 Detect Off
Spectre Off
Spectre 1 Audio On
...Audio On
Spectre 1 Audio Off
...Audio Off
SmartPower
Your detector includes the SmartPower feature that, when activated, will put the unit
into Standby mode (low power) for about 30 minutes after the car’s engine has been
turned off. After 30 minutes in Standby mode, the unit will automatically turn off.
Before SmartPower enters Standby mode, you will hear one
beep and Pwr Save will appear on the display. To return
the unit to normal Power mode or exit Standby mode,
start the car, press any button or turn the unit off and then
on again. The factory setting is SmartPower on. SmartPower Entering
Standby Mode
Pwr Save
SmartPower On
...Power On
SmartPower Off
...Power Off
To Turn Spectre 1 Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Spectre 1 Detect. Tone Visual Display
Two beeps Spectre On
One beep Spectre Off
To Turn SmartPower Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to SmartPower. Tone Visual Display
Two beeps SmartPower On
One beep SmartPower Off
To Turn Spectre 1 Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Spectre 1 Audio. Tone Visual Display
Two beeps Spectre Audio On
One beep Spectre Audio Off