Cobra Digital XRS 9640 - Manual (Page 9)

To Turn On or Off an Audio Alert Using the Program/Mute Button
Press and release
the Program/Mute
button. Tone Visual Display
None None
Settings
Your Detector
Nothing Comes Close to a Cobra ® 13
Settings
Your Detector
12 English
IntelliMute
IntelliMute is a unique new feature that allows you to avoid alerts you
don’t need to hear because you are stopped or moving slowly. By sensing
the “revs” (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
emergency vehicles).
Before IntelliMute will work, you must set an activation point for your engine’s
revs (see page 14). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned on. An i will appear in the display when
IntelliMute is on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine’s revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
Auxiliary
Audio Jack
To Turn IntelliMute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to IntelliMute. Tone Visual Display
Two beeps IntelliMute On,
then i appears in the display
One beep IntelliMute Off
To Turn Auto Mute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Auto Mute. Tone Visual Display
Two beeps Auto Mute On
One beep Auto Mute Off
Auxiliary Audio Jack
The Auxiliary Audio Jack can be
used to connect an external speaker
in environments with high ambient
noise levels. The internal speaker
will be disconnected.
AutoMute
Auto Mute On
AutoMute
On Off
Auto Mute Off
N W i h
IntelliMute On
Intelli
Mute
On
IntelliMute Off
Intelli
Mute
Off
Muting an Alert
Your detector allows you to quickly turn off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back on.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after four (4)
seconds for as long as the signal is detected. The factory setting for Auto Mute is on.
Program/Mute Button
Press and release