CREATIVE Divi Cam 428 - Manual (Page 13)

About Your Camera 2-6
Inserting an
SD Memory
Card
Lift the Memory card slot cover up and insert an SD
memory card as shown.
Do not force the memory card into the Memory card
slot. If it does not fit properly, gently remove it and
try again.
To remove the memory card, turn off your camera
and then gently push the card. The card pops out.
Turning on
your camera 1. Press the Power button. The Status LED lights up
in red and the LCD is activated. The Status LED
turns green.
• Your camera’s
32MB internal
memory is
disabled when
you insert an SD
memory card.
• To avoid
permanent
damage, remove
the memory card
only when when
your player is at
the Main Menu or
when your player
is turned off .
• You can only
access your
memory card if
your camera in
unprotected.
• If your camera
cannot detect
the memory
card, remove the
memory card,
clean it with a
soft cloth.
Figure 2-6: Lifting the Memory card slot
• To conserve
battery power,
your camera
turns the LCD off
if no operation is
made within two
minutes. See
“Configuring
Your Camera” on
page 4-9 to
enable Auto
power off.
Figure 2-7: Turning on your camera
DiViCam428.book Page 6 Friday, August 26, 2005 10:55 AM