Cardo Systems Cardo S-2 - Manual (Page 14)

14
S-™ Stereo Headphones
S-2 Stereo Headphones
TrOuBLESHOOTiNG
NOTE: For most problems, it is recommended as a first step that
you turn the headphones off for one minute and then on again. If
that fails, try pairing the headphones and phone or device again.
if you are unable to connect your headphones with your mobile
phone or Bluetooth ® enabled device, please try the following:
• Ensure your headphones are turned on and are properly charged.
• Ensure the headphones are paired with your mobile phone.
• Ensure your mobile phone’s Bluetooth
® feature is activated. Please
refer to your mobile phone’s user guide for specific instructions.
• Ensure the headphones are within a maximum of 33 feet (10 meters)
of your mobile phone(s) and there are no obstructions, such as walls
or other electronic devices in between.
If the above suggestions do not solve your problem, please recharge
the headphones and remove your mobile phone’s battery for a few
seconds. Then start the pairing procedure again.
NOTE: You can only connect one Phone device and one Music
device to the headphones at one time. Before you attempt to
connect a 2nd phone or music device if one is already connected,
disconnect the first device from the headphones.