Cardo Systems Cardo S-2 - Manual (Page 8)

8
S-™ Stereo Headphones
S-2 Stereo Headphones
Pairing Your Headphones to a Mobile Phone or Music Player
1. Turn on your device and activate its Bluetooth ® function. Please
refer to your device’s user guide for detailed instructions.
2. With the headphones turned OFF, press and hold the CTRL Button
for approximately 8 seconds until the headphones LED status in--
dicator alternately flashes blue and red, indicating that the headp-
phones are in Pairing Mode.
3. Set the device to search for Bluetooth ® devices by following the
instructions in the device’s user guide.
4. The device will list the “Cardo S-2” as a discovered device. Select it
from the list and press OK.
5. When prompted, enter the passkey “0000” (four zeros) and press
“OK” to pair your headphones and the device.
6. When the pairing is complete, the headphones’ LED status indica--
tor will flash blue rapidly 5 times followed by a long beep. Your
device may confirm that the pairing was successful and the headp-
phones’ LED status indicator will begin flashing slowly in blue.
You should now be able to make and receive calls using your
headphones and/or listen to stereo music via your headphones.
IMPORTANT: If pairing cannot be completed within 2 minutes while
the Pairing Mode is activated, the headphones’ LED status indicator