How to operate – Panasonic NE-1054F User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Operate
NOTE:
• Program the remaining Memory Pads as desired by repeating steps 1-5. You may insert up to 10 memory Programs.
•When the PROG indicator is blinking, the program can be cancelled and/or the Pad erased by pressing the
STOPfflESET
Pad.
B. Programming Memory Pads for 2 or 3 Stage Heating:
Example: To program for 2 minutes at DEFROST for 2 stage heating using Memory Pad Numbers
Display Window
1. Complete Steps 1 to 4 on page 12,
3 0
:20
Q
3:30
j Q
3:30
|
•Press the
POWER
Level Selector Pad
5 times. DEF indicator tight will light.
•Press the Memory Pads 2, 0 and 0.
PROG 1
2
PROG 1
?
3 00
z
m
0
01
PROG.
•Press the
PROG.
Pad again.
You have completed programming the
Selected Memory Pad for 2 stage heating
and double heating time for multiple portion
heating automatically.
•2 seconds later, the Display Window will show
your setting program as step 5 on page 12.
3 0
•After all of your programming has been
completed, the Display Window will go blank.
3
00
NOTE:
• Program the remaining pads as desired by repeating the steps above,
DO NOT OPEN THE OVEN DOOR during programming.
• For a 3 stage heating cycle, select a further power level and set the desired heating time between steps 3 and 4 above.
-
1 3
-