Classe Audio Classe Audio - Manual (Page 7)

Positioning the Omicron Monaural Power Amplifier
For best performance, place your Omicron Monaural Power
Amplifier on a solid, non-resonant surface. Do not place the
Omicron Monaural Power Amplifier directly on top of another
component.
Place the Omicron Monaural Power Amplifier near its final set-up
position, allowing 8 inches of clearance at the rear for tightening the
speaker output connectors.
The power transformer in the Omicron Monaural Power Amplifier is
located at the bottom of the chassis and just behind the front plate.
Ideally a few feet should separate this area from any components
which are susceptible to hum. These include preamplifiers, turntables
and interconnect cables. Allow 6 inches above and on each side of
the unit to provide adequate cooling.
8