Classe Audio Classe Audio - Manual (Page 9)

AC power
Check that the AC voltage for which this unit is configured matches
your local AC line voltage. The correct operating voltage is indicated
on the rear of the chassis, adjacent to the AC power inlet. Operating
this unit on AC voltage other than that specified on the rear of the
unit can damage or destroy this unit and increase the risk of electric
shock.
Connect the AC power cord to the rear of the unit and directly to an
AC outlet. For best results, do not use extension cords or multiple-
outlet “power strips”. Also, do not disable the ground pin as this can
increase the risk of electric shock.
Pictured below is the wall plug of the Omicron Monaural Power
Amplifier showing the live and neutral pins. For optimum
performance make sure the pins maintain proper polarity.
Live Pin Neutral Pin
10