Cop y, Wireless settings – Canon Speedlite 580EX II User Manual
Page 37
Advertising
36
You can switch between normal flash and wireless flash. For normal
shooting, be sure to set the wireless setting to OFF.
1
Press the <H> button for 2
sec. or longer until the display
blinks as shown on the left.
2
Set it as the master unit.
Turn the <9> dial until <
M
>
blinks, then press the <8> button.
X
<
M
> and <
w
> will be
displayed, and the Speedlite is set as
the master unit.
Set it as a slave unit.
Do the “Master Unit Setting”
procedure above. For step 2, turn the
<9> dial until <
x
> blinks,
then press the <8> button.
X
<
x
> and <
w
> will be
displayed, and the Speedlite is set as
a slave unit.
Wireless Settings
Master Unit Setting
Slave Unit Setting
A65_03.fm Page 36 Thursday, November 23, 2006 1:27 PM
COP
Y
Advertising