Canon Speedlite 580EX II - Manual (Page 41)

40
Flash exposure compensation and other settings set with the master
unit will also be automatically set in the slave units. Thus, you need not
operate the slave unit(s). Wireless flash with the following settings can
be done in the same way as with normal flash shooting.
· Flash exposure compensation · FEB
· High-speed sync (FP flash) · Manual flash
· FE lock · Stroboscopic flash
If there is another Canon wireless flash system nearby, you can change
the channel No. to prevent signal confusion. Both the master and slave
units must be set to the same channel No.
1 Press the <G> button
so that <w> blinks.
2 Set the channel No.
Turn the <9> dial to select the
channel number, then press the
<8> button.
Using Fully Automatic Wireless Flash
Setting the Communication Channel
With FE lock, if even one Speedlite will result in underexposure, the <Q>
icon will blink in the viewfinder. Open the aperture more or move the slave
unit closer to the subject.
A65_03.fm Page 40 Friday, August 17, 2007 2:39 PM
COP
Y