Acronova NB21 Series - Manual (Page 10)

Operation Manual, Nimbie USB Plus Version 1.2
ƒ Vent
This allows heat to escape. Do not block this otherwise the unit
may overheat.
Rear View
ƒ Power Switch
Turn Nimbie USB Plus on and off.
ƒ Power Socket
Use the provided power cord to connect Nimbie USB Plus to a
wall outlet.
ƒ USB 3.0 Port
Connects Nimbie USB Plus to the host PC (required for USB 3.0
speeds or backward compatible with USB 2.0 at USB 2.0 transfer
speeds).
ƒ Kensington Security Slot
Security lock anti-theft system.
*To use Nimbie USB Plus at its MAXIMUM speed, a USB 3.0
compatible PC or Host Card is required.
LED Indicators
Nimbie USB Plus’ operation status is reflected by the LED indicators.
When turned on, it will enter initialization indicated by a flashing green
ready light. When initialization is complete, the ready light will change
to steady green. The table below describes the meanings of the LED
indicators.
10 © 2012, Acronova Technology, Inc.