Acronova NB21 Series - Manual (Page 13)

Version 1.2 Operation Manual, Nimbie USB Plus
Nimbie USB Plus Installation
Follow the steps below to complete Nimbie USB Plus’s hardware
installation:
1) Place Nimbie USB Plus on level surface so that it stands firmly on
its legs.
2) Place the spindle box that came with the unit in front of Nimbie
USB Plus. Use the alignment pad to appropriately position the
spindle box under the Finish Disc Slot.
3) Use the power cord that came with the unit to connect Nimbie
USB Plus to a wall outlet with a reliable power supply.
You have now successfully completed the installation of Nimbie USB
Plus.
Software Installation
Nimbie USB Plus requires a device driver to be installed before it can
work properly with the application software. Before starting the
application software installation, the device driver must be installed.
System Requirements
ƒ Microsoft Windows XP / Vista / 7 or
Apple OS X 10.6 / 10.7 (for QQGetTray only)
ƒ 1GB RAM or higher
ƒ Optical disc drive (to install the device driver and software from
the installation disc)
ƒ SuperSpeed USB 3.0 port (backward compatible with USB 2.0)
Device Driver Installation
Follow the steps below to complete device driver installation:
1) Connect the power cord to Nimbie USB Plus and a wall outlet.
2) Turn on the host computer, which is connected to Nimbie USB
Plus via USB cable.
3) Insert the provided installation disc into your optical drive on PC.
4) The Windows will launch the installation application automatically.
Note:
For Windows Vista user, click Run SETUP.EXE on AutoPlay
window to start installation. When the User Account Control
screen pops up, click Continue.
5) Click “Install Driver” and follow the instruction to install.
© 2012, Acronova Technology, Inc. 13