AERCO Modulex E8 Controller (and BCM) For Modulex EXT Boilers - Manual (Page 31)

E8 Controller and BCM for Modulex EXT
Installation, Operation & Maintenance Manual
CHAPTER 5: E8 CONTROLLER MENUS AND SUB-MENUS
OMM-0093_0A AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 31 of 108
GF-136-C Ph.: 800-526-0288 PRI: 06/24/2013
Table 5-2: USER Menu Listing (Continued)
FUNCTION DESCRIPTION ENTRY RANGE DEFAULT
HTG CIRCUIT 1 Sub-Menu
MODE Displays Timer Mode for Boiler
- - - -, Standby,
Auto 1, Auto 2, Day,
Night
- - - -
T-ROOM DES 1 Not Applicable
T-ROOM DES 2 Not Applicable
T-ROOM DES 3 Not Applicable
T-REDUCED Not Applicable
T-ABSENCE Not Applicable
T-LIMIT DAY Applies during day-time heating periods
- - - -,
-23.0°F–104.0°F
66.0°F
T-LIMIT N
Applies during reduced night-time
periods.
- - - -,
-23.0°F–104.0°F
50.0°F
HEATSLOPE
Indicate number of degrees that the flow
temperature changes if the outside
temperature increases or decreases by
1°F.
0.00 – 3.00 1.20
OPTIM HEAT Not Applicable
MAX OPT-TIME Not Applicable
ECONO OPTI Not Applicable
PC-ENABLE Not Applicable
RETURN
Press Program Key to exit HTG
CIRCUIT 1 (or 2) sub-menu.
HTG CIRCUIT 2 Sub-Menu
Functions for HTG Circuit 2 are identical to HTG Circuit 1 Functions listed above.
SOLAR M / F Sub-Menu (No Functions Currently In This Sub-Menu)
RETURN
Pressing the Program Key with SOLAR
M/F displayed will change display to
RETURN. Press Program Key again to
redisplay SOLAR M/F. Turning the
Rotary Knob clockwise will advance thd
display to the TIME PROGRAM Menu.
USER USER