Coleman 2300-511 - Manual (Page 2)

Attach Water Hose Adapter to Hot
Water on Demand TM :
1. Remove water pump assembly:
a. Disconnect water pump electrical connection from
Hot Water on Demand TM (fig. 1).
b. Remove water
pump by releasing
the quick connector
(fig. 1).
Electrical Connection
Quick Connector
fig. 1
Be sure Hot Water on Demand TM is turned off and no
water is running through unit. Operate unit from a
camp table or picnic table. Do not set it on ground to
use. (Water will drain when unit is off, preventing dam-
age in freezing temperatures.
Adapter Water
Inlet Fitting
Electrical
Connection
Quick Connector
Water Tubing
Clips
WATER HOSE ADAPTER
Parts Identifier