Coleman 2300-511 - Manual (Page 3)

2. Connect Water Hose Adapter to Hot Water on
Demand TM :
a. Connect Water Hose Adapter electrical connec-
tion to Hot Water on Demand TM .
b. Connect Water Hose Adapter to Hot Water on
Demand TM by inserting Quick Connector.
c. Connect and tighten water hose to adapter water
inlet fitting.
d. Connect water hose to water source.
To Start Hot Water on Demand TM :
1. Turn on water at source (fig. 2) .
2. Turn Hot Water on Demand TM Control Knob to
“COOL” until water
dispenses (fig. 3).
3. Turn Control Knob
to “OFF” (fig. 4).
4. To select desired
temperature setting,
turn Control Knob,
counterclockwise.
To Start Hot Water on Demand TM
(continued)
:
fig. 2
fig. 3 fig. 4
To Remove from Hot Water on
Demand TM :
1. Disconnect Water Hose Adapter electrical con-
nection from Hot Water on Demand TM .
2. Disconnect adapter hose from Hot Water on
Demand TM by releasing the Quick Connector.
3. Reconnect Water Pump electrical connection
to Hot Water on Demand TM .
4. Reconnect Water Pump hose to Hot Water on
Demand TM by inserting the Quick Connector.
Attach Water Hose Adapter to
Hot Water on Demand
TM
(continued)
: