CyClone Microsystems FEP Blade Intelligent I/O Controller COMPACTPCI-824 - Manual (Page 7)

GENERAL INTRODUCTION
CPCI-824 User’s Manual
1-3
Revision 1.0, January 2006
1.3 SPECIFICATIONS
Physical Characteristics The CPCI-824 is a single slot, double high CompactPCI
™
card with a
peripheral slot interface. This product is equipped with an AMCC
PowerPC 440GX mcroprocessor.
Height 9.187” (233.35mm)
Double Eurocard (6U)
Depth 6.299” (160mm)
Width .8” (20.32mm)
Power Requirements The CPCI-824 requires +5V, +12V, -12V and +3.3V from the
CompactPCI
™
backplane J1 connector. The card is Universal and
support either +3.3V or +5V V(I/O).
Table 1-1. CPCI-824 Power Requirements
1.4 ENVIRONMENTAL
A small amount of airflow will be required, such as is found in a typical Eurocard enclosure.
Table 1-2. Environmental Specifications
Figure 1-2 is a physical diagram (not to scale) of the CPCI-824 adapter, showing the location
designators of jumpers, connectors, and major ICs. Refer to this figure when component locations are
referenced in the manual text.
Voltage Current Typical Current Maximum
+3.3V 3.49 Amps 4.99 Amps
+5V 0.03 Amps 0.04 Amps
+12V 0.01 Amps 0.02 Amps
-12V 0.02 Amps 0.03 Amps
Operating Temperatures 0 to 55 Degrees Celsius
Relative Humidity
(non-condensing)
0-95%
Storage Temperatures -55 to 125 Degrees Celsius