ALTANA Mechanical Cupping Tester - Manual (Page 13)

14
English
Operation
LCD Display
In operation, the display will show one of the
following states –
LCD display Status
ZEr0 Indenter is below zero or un-zeroed
ZEr0 (flashing) Indenter is below the zero position by at
least 0.5mm
nn.nn Normal distance reading
HigH Reading exceeds maximum range
OFF Manual power off indication
Bat (flashing intermittently) Low Battery. Change battery soon
Cal- - Cal Cal- (flashing at start-up) Instrument needs recalibrating 4
Err1 Measurement system error 5