ALTANA Auto-Chart User Manual
Page 13
4.2 Transfer Data and Save it in Database
Connect the instrument with the PC and check the interface and instrument settings
(1)
.
For changing the settings, press the Browse button
(2)
. A selection box appears which
shows all connected devices.
Make sure the required database is activated
(3)
. After start of transfer
(4)
the system
automatically guides you for saving the data:
Confirmation with "OK" opens a window which allows to input additional information to
every data set recorded in the left column
(5)
, e.g. Vehicle Identification No. and a
comment
(6)
. Entering an information while the dropdown box is open
(7)
, will save it in the
parameter list for future use.
If needed, a record can be demarked to have it not save in the database
(8)
.
After editing all individuals, press OK to save the data. If you cancelled the procedure, you
may start again with menu "File > Save".