ALTANA Auto-Chart User Manual
Page 39
7. auto-chart Lite
This software is a version for transfer, saving and documentation of the measured data.
Organizers, database and filters need to be defined in the full version. Thus, unintended
changes are excluded.
Take readings with the instrument
Select the identification parameters of the object to be measured (for operation refer to the
instruments manual). After all parameters have been selected, the name of the first
checkzone will be displayed. Ready for measurement:
Transfer data and save in database
Connect the instrument with the PC and check the interface and instrument settings
(1)
.
For changing the settings, press the browse button
(2)
. A selection box appears which
shows all connected devices.
Make sure the required database is activated
(3)
. After start of transfer
(4)
the system
automatically guides you for saving the data:
Confirmation with "OK" opens a window which allows to input additional information to
every data set recorded in the left column
(5)
, e.g. Vehicle Identification No. and a
comment
(6)
: