AltiGen IP 720 - Manual (Page 19)

IP 720 User Manual 11
Program
Keys
Lets users associate a
programmable key with a
speed dial number or
feature code directly from
the IP phone. • If the system administrator has
allowed it, you can associate
certain programmable keys with a
speed dial number or feature code
from the IP phone menu.
Redial button
Redials a selected number
from the last16 numbers
dialed.
• Pressing Enter dials the number
displayed.
• Redials up to 32 digits.
• When a new call comes in, the
phone will exit this menu and go
to ring state. If in this menu for
longer than 20 seconds without
any input, the phone exits this
menu.
Release button
Releases a call from the
connected state. Deletes
characters entered on the
LCD. While onhook,
releases phone from an
active state. Rejects an
incoming call. • When you press the Release
button to reject an incoming call,
the ringing will stop and the call
will follow the extension's Ring
No Answer (RNA) handling
rules.
Ring Tones
Select from one of 14 ring
tones. • Custom ring tones are not
supported.
Speaker button
Enables use of speaker
phone.
Transfer
button Transfers an active call to
another number.
• This button cannot be used to
“flash” after being used to
transfer a call. To reconnect to a
call after using the Transfer
button, use
thebutton or the Flash button.
Voice Mail
button Enables access to voice
messages.
• The VM count that appears in the
LCD reflects new messages
(previously heard messages are
not included).
Feature Description Notes