American Diagnostic Corporation (ADC) 427 Adtemp - Manual

Adtemp TM 427
TempleTouch TM
Thermometer
USE, CARE &
MAINTENANCE
Intended Use:
A Temple Touch thermometer is a device which enables accurate body tem-
perature measurements obtained by using a unique probe, which measures
the heat flow from the blood vessels to the skin and converts it to body temper-
ature from the temple area in approximately 6-8 seconds.
Safety Information:
• High, prolonged fever requires immediate medical attention, especially for young children.
• Do not allow children to take their temperatures unattended.
• Read the enclosed instructions carefully to ensure accurate temperature readings. Temperature readings are
affected by many factors including exercise, drinking hot or cold beverages prior to taking a reading as well
as technique.
• WARNING: Keep batteries out of children’s reach. Swallowing a battery could be harmful. Batteries
should not be recharged or placed into extreme heat as they may explode.
• WARNING: It is recommended to remove the batteries from the thermometer when it is not used for a
long period. Do not dispose of batteries in fire, recharge, put in backwards, disassemble, mix with used
or other battery types – they may explode or leak and cause injury. Waste batteries should be deposited in a
batteries recycling trash only.
• CAUTION: Do not drop the thermometer or expose to heavy shock.
• CAUTION: Do not immerse thermometer in water or any other liquid.
• CAUTION: Do not store the unit in direct sunlight, at a high temperature, in high humidity or dust.
• CAUTION: Stop using the thermometer if it operates erratically or if display malfunctions.
• CAUTION: Clean the thermometer probe before storing.
• CAUTION: Do not attempt to disassemble the unit except to replace the batteries.
• CAUTION: Do not autoclave. Please note the cleaning procedures described in this manual
Specifications
Feature Performance / Data: Measurement time 6-8 seconds
Measurement location: Temple area of the forehead
Measurement range: 95°F to 107.6°F (35°C to 42°C)
Operation environment: 60.8°F-104°F (16° C - 40° C)
Humidity: 15-95% (non condensing)
Storage environment: -4°F to 122°F (-20° C - 50° C)
Humidity: 15-95% (non condensing)
Measurement readout: Celsius or Fahrenheit
Accuracy: Complies with ASTM E 1112-00 standard requirements
Display: TN LCD 0.63" X 0.44" (16 mm X 11 mm)
Battery: 2 AAA 1.5volt batteries
Battery life: Minimum 1000 full duty cycles over 24 month period
Weight: 1.3oz (37gr) including batteries
Dimensions: 4.7" x 1.17" x 1" (12 cm x 3.0 cm x 2.4 cm )
Memory: Last reading display when turned on
Auto shut off: After 60 seconds
Case material: Medical grade ABS plastic
Probe material: Medical grade Stainless steel ,medical grade ABS plastic
Warranty: 2 year
ADC
55 Commerce Drive
Hauppauge, NY 11788
Made in China
tel: 631-273-9600, 1-800-232-2670
fax: 631-273-9659
www.adctoday.com
email: [email protected]
Patent # 7597668
IB p/n 93-427-00 rev 1 Printed in China
Display
Window
Multi-Function
Button
Parts and Assembly
Non-invasive
sensor
WARRANTY
This Thermometer is guaranteed for a period of 24
months from date of purchase. This warranty does not
cover batteries, or damage resulting from improper
handling or use. Specific legal rights stipulated in your
state may guide this warranty. If you have a legitimate
claim under this warranty, send item(s) postage paid
to Service Center, Attn: Repair Dept., 55 Commerce
Dr., Hauppauge, NY 11788. Please include your
name and address, phone no., proof of purchase, and
a brief note explaining the problem, your return ad-
dress and $2.00 to cover shipping and handling.
This manual is available online in a variety of languages,
follow the links for language options.
www.adctoday.com/care
To register your product visit us at
www.adctoday.com/register