American Diagnostic Corporation (ADC) ADview Modular Diagnostic Station - Manual (Page 20)

10
ICON/DISPLAY INDICATES…
Battery fully charged
Battery is charging (segments animated)
Power-off state
As the charge level drops, the segments will be
turned off in sequence from the right to the left.
The battery charge is very low. Recharge before
using. (segment flashing)
Visual Cues - Blood Pressure Module
Icons and numeric displays on your device assist you in taking quick and accurate readings.
ICON/DISPLAY INDICATES…
The systolic BP, read in mmHg, displays
immediately below this symbol.
The diastolic BP, read in mmHg, displays
immediately below this symbol.
Unit of measurement for SYS, DIA, and MAP
Pulse rate, in beats per minute, displays
immediately below this symbol.
If this icon is lit on power-up, MAP mode is
enabled. After a measurement, this icon is lit when
MAP is displayed in the space below.
These letters are displayed in the pulse rate display
area when you are checking the device’s calibration.
Indicates an issue associated with the cuff, its
position, or connection. Please check the cuff and
hose and try again. Additionally, check page 38 for
troubleshooting details.